A&L Bearings and Components, Inc. | Home of the Dura-Roll Brand
Member of the American Bearing Manufacturers Association (ABMA)
eCatalog
| Materials | |
|---|---|
| BALL | BODY |
| Alloy Steel | Low Carbon Steel |
| Heat Treated | Zinc Plated |
| Hard Chrome Plated | Chromate Treated |
| STUD | |
| Low Carbon Steel, Zinc Plated | |
| AMR/AML Rod Ends Import 2-Piece, Metal to Metal with Studs | ||||||||||||
 | ||||||||||||
| Male Rod Ends | D | L | S | P | T | A | N | C | a° | Ult. Static Radial | Approx Weight | Right Hand Part No. |
Left Hand Part No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Length | Length | Length | Width | Length | Thd. | Length | Mis. Angle | ||||
| +0.01 -0.01 | +0.015 -0.015 | Min. | Ref. | Ref. | +0.015 -0.015 | UNF 3A | +0.062 -0.031 | Ref. | Load (lbs.) | (lbs.) | ||
| AMR3S | AML3S | 0.625 | 1.016 | 0.437 | 0.5 | 0.234 | 1.25 | 10-32 | 0.75 | 45 | 217 | 0.04 |
| AMR4S | AML4S | 0.75 | 1.031 | 0.5 | 0.562 | 0.25 | 1.562 | 1/4-28 | 1 | 40 | 400 | 0.05 |
| AMR5S | AML5S | 0.875 | 1.219 | 0.593 | 0.687 | 0.312 | 1.875 | 5/16-24 | 1.25 | 42 | 645 | 0.1 |
| AMR6S | AML6S | 1 | 1.562 | 0.812 | 0.906 | 0.359 | 1.938 | 3/8-24 | 1.25 | 46 | 900 | 0.15 |
| AMR7S | AML7S | 1.125 | 1.75 | 0.937 | 1.062 | 0.406 | 2.125 | 7/16-20 | 1.375 | 44 | 1150 | 0.24 |
| AMR8S | AML8S | 1.312 | 2 | 1 | 1.125 | 0.453 | 2.438 | 1/2-20 | 1.5 | 48 | 1500 | 0.35 |
| AMR10S | AML10S | 1.5 | 2.5 | 1.375 | 1.5 | 0.484 | 2.625 | 5/8-18 | 1.625 | 52 | 1750 | 0.61 |
| AMR12S | AML12S | 1.75 | 3 | 1.625 | 1.812 | 0.593 | 2.875 | 3/4-16 | 1.75 | 46 | 2500 | 1.03 |
| AFR/AFL Rod Ends Import 2-Piece, Metal to Metal with Studs | ||||||||||||||
 | ||||||||||||||
| Female Rod Ends | D | L | S | P | T | A | N | C | a° | E | F | Ult. Static Radial | Approx Weight | Right Hand Part No. |
Left Hand Part No. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Length | Length | Length | Width | Length | Thd. | Length | Mis. Angle | Dia. | Flat | ||||
| +0.01 -0.01 | +0.015 -0.015 | Min. | Ref. | Ref. | +0.015 -0.015 | UNF 3A-2B | +0.062 -0.031 | Ref. | +0.01 -0.01 | +0.01 -0.01 | Load (lbs.) | (lbs.) | ||
| AFR3S | AFL3S | 0.625 | 1.016 | 0.437 | 0.5 | 0.234 | 1.062 | 10-32 | 0.5 | 45 | 0.406 | 0.312 | 217 | 0.05 |
| AFR4S | AFL4S | 0.75 | 1.031 | 0.5 | 0.562 | 0.25 | 1.312 | 1/4-28 | 0.687 | 40 | 0.468 | 0.375 | 400 | 0.06 |
| AFR5S | AFL5S | 0.875 | 1.219 | 0.593 | 0.687 | 0.312 | 1.375 | 5/16-24 | 0.687 | 42 | 0.5 | 0.437 | 645 | 0.11 |
| AFR6S | AFL6S | 1 | 1.562 | 0.812 | 0.906 | 0.359 | 1.625 | 3/8-24 | 0.812 | 46 | 0.687 | 0.562 | 900 | 0.17 |
| AFR7S | AFL7S | 1.125 | 1.75 | 0.937 | 1.062 | 0.406 | 1.812 | 7/16-20 | 0.937 | 44 | 0.75 | 0.625 | 1150 | 0.27 |
| AFR8S | AFL8S | 1.312 | 2 | 1 | 1.125 | 0.453 | 2.125 | 1/2-20 | 1.062 | 48 | 0.875 | 0.75 | 1500 | 0.4 |
| AFR10S | AFL10S | 1.5 | 2.5 | 1.375 | 1.5 | 0.484 | 2.5 | 5/8-18 | 1.375 | 52 | 1 | 0.875 | 1750 | 0.68 |
| AFR12S | AFL12S | 1.75 | 3 | 1.625 | 1.812 | 0.593 | 2.875 | 3/4-16 | 1.562 | 46 | 1.125 | 1 | 2500 | 1.11 |